background image

23

You can record from CDs, tapes, or the radio
as you like. For example, you can record just
the songs you want or begin recording from
the middle of the tape. The recording level is
adjusted automatically.

1

Insert a blank tape into deck B.

2

Press FUNCTION repeatedly until
the source you want to record (e.g.,
CD) appears in the display.

3

Press 

r

 REC.

Deck B stands by for recording, and the
indicator on the 

·

 button (for the front

side) lights up green.

4

Press DIRECTION repeatedly to
select 

A

 to record on one side or

ß

 (or RELAY) to record on both

sides.

Recording on a
tape manually

The Tape Deck

5

Press 

P

 on deck B.

Recording starts.

6

Start playing the source to be
recorded.

To

Press

Stop recording

p

 on deck B

Pause recording

P

 on deck B

Tips

• If you want to record on the reverse side, press 

ª

so the indicator on the 

ª

 button (for the reverse

side) lights up green.

• When you want to reduce the hiss noise in low-

level high-frequency signals, press DOLBY NR
before step 5 so “DOLBY NR B” appears in the
display.

2

ª

1 3

4

5

p

DOLBY
NR

Summary of Contents for LBT-D390 - Compact Hi-fi Stereo System

















































Reviews: