background image

34

GB

4

* When an MP3 file containing ID3 tags is played,

the information that appears on the on-screen
display consists of file names, and may thus differ
from the ID3 tag information shown on the
system’s display.

5

6

* In Program Play mode, total playing time of the

program appears.

7

“REPEAT,” “REPEAT1” or no display

8

Key control level or no display

Using the on-screen display
(continued)

Tip

Depending on conditions, some items are displayed
and others are not.

Notes

• Normally, leave the display mode set to either ON

SCREEN 1 or 2. When you select ON SCREEN
OFF, you cannot check the operating status while
operating the CD player. In this case, check the
information on the front panel display.

• When you record video signals played back from

this system onto a video tape (,etc.), be sure to
select ON SCREEN OFF. Otherwise, the display
information will also be recorded on the video tape.

• You may hear some noise when you change the on-

screen display.

When

During playback

In stop mode

The display shows:

Elapsed time of current track

“STOP”

When

In stop mode

The display shows:

Total playing time of the
current disc*

When

In stop mode of a
disc with MP3 files

During playback of
a disc with MP3
files*

In Program Play
mode

Other condition

The display shows:

Folder name

Current folder name and file
name

Programmed disc and track
number

No display

Summary of Contents for LBT-XGV10AV

















































Reviews: