20
GB
Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner's memory first
(see “Presetting radio stations” on page 18).
1
Press TUNER/BAND repeatedly to
select “FM” or “AM.”
2
Press TUNING MODE repeatedly until
“PRESET” appears.
3
Press TUNING –/+ repeatedly to select
the desired preset station.
Tip
You can also select the desired preset station by
pressing PRESET –/+ on the remote after step 1.
Listening to non-preset radio
station
— Manual Tuning
1
Press TUNER/BAND repeatedly to
select “FM” or “AM.”
2
Press TUNING MODE repeatedly until
“MANUAL” appears.
3
Press TUNING –/+ repeatedly to tune in
the desired station.
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
• When an FM stereo program has static noise, press
FM MODE repeatedly until “MONO” appears.
There will be no stereo effect, but the reception will
improve.
• Press TUNING MODE repeatedly until “AUTO”
appears in step 2 above, then press TUNING –/+.
The frequency indication changes and scanning
stops when the system tunes in a station (Automatic
Tuning).
• To record from the radio, see “Recording to a tape”
on page 22.
