background image

14

US

C

PAD A (page 40)
PAD B (page 40)

Press to add percussion sound.

D

FRONT BUILT-IN BEAM 
(page 45)
BOTTOM BUILT-IN BEAM 
(page 45)

Press to change the lighting effect of 
the beam.

E

./>

 (go backward/go 

forward) (pages 19, 55)

Press to select a track.

+/– (tuning) (page 31)

Press to tune in a radio station.

 (play) (page 19)

X

 (pause) (pages 19, 33)

Press to start or pause playback.

x

 (stop) (pages 19, 31, 33)

Press to stop playback or recording.

F

BEAT LEVEL (page 40)

Press to adjust the beat level.

BEAT P (pages 41)
BEAT PATTERN – (pages 41) 

Press to select the rhythms of the 
beat.

G

/–

*

 (pages 19, 27, 44

49)

Press to adjust the volume.

*

The 

 button has a tactile 

dot. Use the tactile dot as a reference 
when operating the system.

H

BEAT ON/OFF (page 41)

Press to turn on or off the rhythms of 
the beat.

BEAT SPEED + (page 41)
BEAT SPEED – (page 41)

Press to change the beat speed.

I

GROOVE (page 36)

Press to reinforce the bass.

J

SOUND EFFECT (page 38)

Press to select an effector mode.

K

FUNCTION (pages 19, 31, 45, 
48)

Press to select a function.

Summary of Contents for LBT-ZUX9 - Mini Hifi Component

































































Reviews: