background image

22

US

— Program Play

You can make a program of up to 25 steps 
from all the discs in the order you want 
them to be played back.
You can program all the tracks from a 
disc, all the MP3 audio tracks from a 
folder or a track as a step in the program 
list.
You can synchro record the programmed 
tracks onto a tape (page 34) or a USB 
device (page 24).

1

Press CD.

2

When playback is stopped, 
press PLAY MODE on the 
remote repeatedly until 
“PROGRAM” lights up in the 
display.

3

Press one of the DISC 1 ~ 3 
buttons or DISC SKIP/
EX-CHANGE (or DISC SKIP on 
the remote) to select a disc.

To program all the tracks on a disc 
at once:

Proceed to step 5 while “ALL” appears 
in the display.

To program all the MP3 audio 
tracks on a folder at once:

Press 

 

+/– repeatedly until the 

folder you want appears in the display, 
then proceed to step 5.

4

Press 

.

 or 

>

 repeatedly 

until the track number you want 
appears in the display.

The total playing time flashes in the 
display.

To program an MP3 audio track:

Press 

 +/– repeatedly until the 

folder you want appears in the display, 
then press 

.

 or 

>

 repeatedly 

until the track number you want 
appears in the display. 

5

Press ENTER.

The track(s) is(are) programmed.
The programmed step number appears 
in the display.

6

To program additional discs or 
tracks.

7

Press 

NX

 (or 

N

 on the 

remote).

Program Play starts.

Creating your own program

To program

Repeat steps

Other discs

3 and 5

Other tracks on 
the same disc

4 and 5

Other tracks on 
other discs

3 to 5

Track 
number

Total playing time 
(including selected 
track)

Summary of Contents for LBT-ZUX9 - Mini Hifi Component

































































Reviews: