27
US
US
B D
e
vi
ce
Listening to music of a
USB device
You can listen to music stored in an
optional USB device (Digital music
player or USB storage media) by
connecting it to the
(USB) port on
the unit.
This system can only play back MP3*
audio track of the USB device.
See “Playable/Recordable USB devices”
(page 6) for a list of USB devices that
can be connected to this system.
* Files with copyright protection (Digital
Rights Management) cannot be played back
by this system.
1
Press
(or USB on the
remote).
2
Connect an optional USB device
to the
(USB) port on the
unit.
When the USB device is connected,
the display changes as follows:
Reading
t
volume label*
* “Storage Drive” appears when there is no
volume label assigned to the USB device.
Note
Depending on the type of USB device, it
may take a few seconds before “Reading”
appears in the display.
3
Press
NX
(or
N
on the
remote).
4
Turn MASTER VOLUME (or
press /– on the
remote) to adjust the volume.
To resume playback from the point
you stop the track
–
Resume Play
This system memorizes the point where
you stopped the playback. So you can
resume playback from that point.
1
While playing a track, press
x
to
stop playback.
“Resume” appears in the display.
2
Press
NX
(or
N
on the remote).
The system starts playback from the
point you stopped in step 1.
Resume Play is not cancelled even if you
change the funtion except
– you change to TUNER function when
CD/USB power manage is set to OFF.
To remove the USB device
1
Press
x
to stop playback.
2
Check that the REC/ERASE
indicator on the unit is light off.
3
Press
"/1
to turn off the system.
4
Remove the USB device.
Other operations
USB
To
Do this
Stop playback
Press
x
.
To cancel resume
playback, press
x
twice. “RESUME”
disappears from the
display.
Pause playback
Press
NX
(or
X
on the
remote).
To resume playback,
press
NX
(or
X
on the
remote) again.
Select the next or
previous folder
Press
+/–.
Select the next or
previous track
Press
.
or
>
.
Continued
l
