background image

6

US

This product is designed to play back 
discs that conform to the Compact Disc 
(CD) standard. Recently, various music 
discs encoded with copyright protection 
technologies are marketed by some record 
companies. Please be aware that among 
those discs, there are some that do not 
conform to the CD standard and may not 
be playable by this product.

When you play back Multi Session discs 
with different formats for each session, 
the format of the first session is 
recognized as the disc type. Tracks in the 
second and subsequent sessions are 
played back if they are the same formats 
as the first session.

Playable/Recordable 
USB devices

You can use the following Sony USB 
devices on this system.

Verified Sony digital music player 
(as of April 2007)

Verified Sony IC Recorder 
(as of April 2007)

Verified Sony USB storage media
(as of April 2007)

Notes

• Do not use USB devices other than these USB 

devices. Operation of models not listed here is 
not guaranteed.

• Operation may not always be ensured even 

when using these USB devices.

• Some of these USB devices may not be 

available for purchase in certain areas.

• See the operating instructions supplied with 

the USB device for details on the operation 
method.

• If you want to format the above USB devices, 

be sure to use the models or formatter 
software supplied with the USB device. 
However, if the formatting process is 
performed using other method, the recording 
may not be properly done.

Music discs encoded with 
copyright protection 
technologies

Note on Multi Session disc

Product name

Model name

Walkman

NWD-B103/B105/
B103F/B105F

Product name

Model name

IC Recorder

ICD-U50/U60/U70

Product name

Model name

MICROVAULT USM256J/512J/1GJ/2GJ/

4GJ

USM512JX/1GJX/2GJX/
4GJX

USM256H/512H/1GH/
2GH/4GH

Summary of Contents for LBT-ZUX9 - Mini Hifi Component

































































Reviews: