23
English
5-1-9. Setting inch/mm switching
•
After completing 5-1-6 or 5-1-8, press the X-axis selector key to select the mode for setting
whether or not inch/mm switching is performed.
•
Inch/mm switching can be enabled or disabled with the
0
key or
key.
•
Inch/mm switching is enabled exfactory.
Example
Operating Procedure
Display
Select the input to the first axis.
Press the
0
or
key.
Pressing the
0
or
key again returns to
the original display unit.
X
0
or
This completes all the initial settings.
Perform initial settings in the same way for the other axes (Y, Z). First, press the Axis selector key
for the axis for which you want to make the settings.
(inch/mm switching enabled)
(inch/mm switching disabled)
(inch/mm switching enabled)
