45
English
5-13. RS232C Input/Output
When RS232C input/output is used, the following input/output operations are possible.
• Display data output
• Basic key operation input
• Program data input/output (see 5-14-7 Inputting and outputting the program via the RS232C”.
5-13-1. Display data output
If the
P
key is pressed when the present values are displayed, the displayed data is output to
the RS232C in accordance with the format specified in the initial settings.
Operating Procedure
Display
(Present values displayed)
Press the Preset key.
P
(Present values displayed)
Data
output
Note
If the
P
key is pressed consecutively, it should be released for one second or longer. Data will
not be output if it is pressed within one second.
In computer communication mode
Continuous output mode
or
New line output mode
The data is signed zero-suppressed 7-digit data (space when sign is positive)
: Display status (N: normal, D: double display)
: Display mode (I: INC, A: ABS)
: Unit (MM: mm, INCH: inch)
Note
In the case of two axes, there is no Z-axis data.
In Printer mode
The
Data
is signed zero-suppressed 6-digit X-axis data (space when the sign is positive), and
the 7th digit is not output.
4
: Unit (M: mm, I: inch)
X
1 2
Y
=
LF
1 2
=
Z
1 2
=
CR
Data
Space
Data
Data
Space
3
3
3
4 1
R
CR
Data
LF
Space
X
=
LF
Y
=
LF
CR
CR
Z
=
LF
CR
1 2
1 2
1 2
3
3
3
1
3
2
Data
Data
Data
Data
