Wireless Noise Canceling Stereo Headset
LinkBuds S
Using only one unit of the headset
You can remove one unit of the headset from the charging case and use the unit by itself.
In this case, only the unit that has been removed from the charging case will turn on.
When you put on the other unit of the headset
The connection between the left and right units is established automatically, and you will hear the music or other audio
on both units of the headset.
Assigning functions to the touch sensors
Depending on the headset unit you are wearing, some functions may not be available in the factory settings. In this case,
you can change the function assignments to the touch sensors using the “Sony | Headphones Connect” app.
Hint
In the factory settings, the music playback function is assigned to the right unit.
When listening to music with one ear, if only the right unit is worn in your ear, use the touch sensor on the right unit to play music.
When only the left unit is worn in your ear, operate the connected device to play music.
When you play music or other stereo audio while wearing only one unit, you will hear monaural sound with the left and right
channels mixed.
You can also enjoy hands-free calls even when you are wearing only one unit of the headset. When you receive an incoming call,
answer the call using the unit of the headset you are wearing. If you put the other unit into the other ear while you are talking with
only one unit, you can talk with both units.
Note
When Service Link is turned on with the “Sony | Headphones Connect” app, use the right unit of the headset. You cannot use
only the left unit of the headset.
Depending on the assignment of the touch sensors and/or the Voice Assistant setting, you may not be able to use only one unit
of the headset.
Refer to the following and check the setting in the “Sony | Headphones Connect” app.
Voice Assistant setting menu
item
Specification
[Voice Assist Function of Mobile
Device]
Either unit of the headset can be used.
[Google Assistant] or [Amazon
Alexa]
Only the headset unit with the Touch Sensor Control function set to [Playback control] can
be used.
Assign the [Playback control] function to the headset unit you want to use.
In the factory settings, [Playback control] is assigned to the right unit.
When you assign [Playback control] to both headset units, full functionality is only available
on the right unit.
19
