Wireless Noise Canceling Stereo Headset
LinkBuds S
Functions for a phone call
The functions available during a call may vary depending on the profile supported by your smartphone or mobile phone.
In addition, even if the profile is the same, the available functions may vary depending on the smartphone or mobile
phone.
Depending on the connected device or the application you are using, the functions may not work properly even if you try
to operate them with the headset.
Refer to the operating instructions supplied with the smartphone or mobile phone.
Supported profile: HFP (Hands-free Profile)
During standby/music playback
Hold your finger to the touch sensor on the right unit for about 2 seconds or more to start up the voice dial function of
the smartphone/mobile phone, or activate the Google app on an Android smartphone or Siri on an iPhone.
Outgoing call
You can use either the left or right unit to perform the following operations.
When only one unit of the headset is worn in your ear, operate the unit that is worn.
Tap the touch sensor twice quickly (with an interval of about 0.3 seconds) to cancel an outgoing call.
You can perform the following operations on the headset unit to which the noise canceling function is not assigned (the
right unit in the factory settings).
Hold your finger to the touch sensor for about 2 seconds or more to change the call device back and forth between
the headset and the smartphone/mobile phone.
Incoming call
You can use either the left or right unit to perform the following operations.
When only one unit of the headset is worn in your ear, operate the unit that is worn.
94
