17
When the main projector turns on, its MAIN, LAMP,
and IMB indicators will be solid green.
When the sub projector turns on, its MAIN and
LAMP indicators will be solid green (its IMB
indicator will remain red).
3
Tap [Close] to close the “Projector Lamp Control”
dialog box.
The above procedures complete preparations and
confirmation for using the projection system.
Shutting Down the
System
1
Tap
on the upper right of the screen.
2
Select [Shutdown], and then tap [OK].
The projection system will shut down.
The MAIN indicators and LAMP indicators on the
rear of the projectors will turn to blinking green while
cooling. Once cooling is complete, the LAMP
indicators will turn to solid red. Leave the system as it
is at this point.
3
Once the MAIN and LAMP indicators turn solid red,
and the main projector’s IMB indicator begins
blinking red (the sub projector’s IMB indicator will
remain red), move the power switch to off (
a
) to turn
off the power.
Caution
If, after shutdown, the power switch on the rear of a
projector is not turned off and only the server is turned on,
the IMB on the main projector will not power on. If this
happens, the IMB indicator will blink red. Turn the power
switch off, and then turn the power on again.
Summary of Contents for LKRA-010
Page 51: ...Sony Corporation ...
