Location and Function of Parts and Controls
12
Location and Function of Parts and Controls
Front Panel
a
POWER switch and indicator
Press to turn on the power. The indicator turns on. Press
again to turn off the power.
b
KEY INHIBIT indicator
When the key inhibit function works, the indicator
lights.
For the key inhibit function, refer to “KEY INHIBIT
menu” on page 22.
c
VOLUME buttons
Press the + button to increase the volume or the – button
to decrease it.
d
Menu operation buttons
Displays or sets the on-screen menu.
M/m/</,
(arrow) buttons
Select the menu or make various adjustments.
MENU button
Press to display the on-screen menu.
Press again to clear the menu.
RESET button
Resets the value of an item back to the previous
value. This button functions when the menu item is
adjusted (displayed) on the screen.
ENTER button
Press to confirm a selected item on the menu.
e
SCAN select button
You can change the scan size of the picture. When you
press the button, the scan size is changed to normal (5%
over scan), under (-3% under scan).
f
RGB/COMPONENT button
Press to monitor the signal through the RGB/
COMPONENT input connectors.
g
LINE B button
Press to monitor the signal through the LINE B input
connectors.
h
LINE A button
Press to monitor the signal through the LINE A input
connectors.
i
Speakers
The audio signal which is selected by the input select
button on the front panel is output.
LINE A
LINE B
SCAN
RESET
MENU
VOLUME
POWER
KEY
INHIBIT
ENTER
RGB/
COMPONENT
LINE A
LINE B
SCAN
RESET
MENU
VOLUME
POWER
KEY
INHIBIT
ENTER
RGB/
COMPONENT
8
9
7 6 5
4
3 2 1