Precautions / Precautions
GB
4
Precautions
On safety
• The nameplate indicating operating voltage, power
consumption, etc., is located on the rear.
• Should any solid object or liquid fall into the cabinet,
unplug the unit and have it checked by qualified
personnel before operating it any further.
• Unplug the unit from the wall outlet if it is not to be
used for several days or more.
• To disconnect the AC power cord, pull it out by
grasping the plug. Never pull the cord itself.
• The socket-outlet shall be installed near the equipment
and shall be easily accessible.
Handling the LCD screen
• Bright or dark points of lights (red, blue or green) may
appear on the LCD screen. This is not a malfunction.
The LCD screen is made with high-precision
technology with more than 99.99 % of the picture
elements intact. However, some picture elements may
not appear intermittently.
• Do not leave the LCD screen facing the sun as it can
damage the LCD screen. Take care when you place
the unit by a window.
• Do not push or scratch the LCD monitor’s screen. Do
not place a heavy object on the LCD monitor’s screen.
This may cause the screen to lose uniformity.
• If the unit is used in a cold place, horizontal lines or a
residual image may appear on the screen. This is not
a malfunction. When the monitor becomes warm, the
screen returns to normal.
• If a still picture is displayed for a long time, a residual
image may appear. The residual image will eventually
disappear.
• The screen and the cabinet become warm during
operation. This is not a malfunction.
About the fluorescent tube
A specially designed fluorescent tube is installed as the
lighting apparatus for this unit. If the LCD screen
becomes dark, unstable or does not turn on, consult your
Sony dealer.
Maintenance
• Clean the cabinet, panel and controls with a soft cloth
lightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent, such as benzine.
• Do not rub, touch, or tap the surface of the screen with
sharp or abrasive items, such as a ball-point pen or
screwdriver. This type of contact may result in a
scratched picture panel.
• Clean the screen with a soft cloth. If you use a glass
cleaning liquid, do not use any type of cleaner
containing an antistatic solution or similar additive as
this may scratch the screen’s coating.
Providing an ample amount of space
around the unit (for the LMD-320W only)
Make sure there is more space around the unit than that
shown in the illustrations below to prevent an internal
heat build-up.
Front
Side
Disposal of the unit
• Do not dispose of the unit with general waste. Do not
dispose of the monitor with household waste.
• The fluorescent tube contains mercury. Dispose of the
monitor in accordance with the regulations of on local
sanitation authority.
If you have any questions about this unit, contact an
authorized Sony dealer.
15 (
19
/
32
)
15 (
19
/
32
)
Unit: cm (inches)
1.2 (
1
/
16
)
Unit: cm (inches)
Summary of Contents for LMD-150
