The selected tab is shown in blue, and setting items
of the selected tab appear.
5
Select an item.
Press the ♦/♦ button to select the item.
The item to be changed is displayed in blue.
6
Make the setting or adjustment on an item.
When changing the adjustment level:
To increase the number, press the • button.
To decrease the number, press the • button.
When selecting the setting:
Press the +/+ button to select the setting.
J
Note
1
If the Control Lock is set to "On;' the setting cannot
be changed.
For details about Control Lock, see page 27.
About the memory of the settings
The settings are automatically stored in the monitor
memory.
About the control navigation
Depending on the state, the operating buttons of the unit
light as shown below:
White light: Operable state.
Green light: Operating state.
Off: Unable to operate.
Adjustment Using the
Menus
ltems
The screen menu of this monitor consists of the
following items.
@ Color Tone Adjustment
Gamma
Phase
Chroma
Brightness
Contrast
Color Temperature
Gain R Offset
Gain G Offset
Gain B Offset
Bias R Offset
Bias G Offset
Bias B Offset
Mono
Sharpness H
Sharpness V
RGB Range
RGB/YPbPr
Sync Detect
ACC
CTI
NTSC Setup
0
Screen Control
HD Scan Size
SD Scan Size
Flip Pattern
SD Aspect
APA
Shift H
Shift V
Dot Phase
Dot Pitch
�
PIP /POP
Clipping Size
Sub Screen Position
Pattern Skip
-E] Input Configuration
Port A Input Select
Port B Input Select
Adjustment Using the Menus
123
