background image

Adjustment Using the Menus

 

24

ASPECT

Press the button to set the aspect ratio of the picture, 4:3 
or 16:9.

Note

The panel of the monitor is 15:9.
When the 16:9 signal is displayed, black bars appear in 
the upper and lower positions of the display. This is not 
a malfunction (see “Scan mode image” on page 24).

BLUE ONLY

Press the button to eliminate the red and green signals. 
Only blue signal is displayed as an apparent 
monochrome picture on the screen. This facilitates 
“chroma” and “phase” adjustments and observation of 
signal noise.

MONO

Press the button to display a monochrome picture. When 
the buttons is pressed again, the monitor switches 
automatically to color mode.

MARKER

Press the button to display the marker. Set the aspect 
marker in the MARKER SETTING menu (see page 22).

H/V DELAY

Press the button to observe the horizontal and vertical 
sync signals at the same time.

WFM/ALM

Press the button to display the WFM/ALM display. Set 
the WFM/ALM display setting in the WFM/ALM 
DISPLAY SETTING menu (see page 22).

BRIGHTNESS

Press the button to display the adjustment screen and 
adjust the picture brightness. Press again to hide the 
adjustment screen. However, the picture brightness 
remains adjustable. Turn the menu selection control 
right to increase the brightness and turn left to decrease 
it.

CONTRAST

Press the button to display the adjustment screen and 
adjust the picture contrast. Press again to hide the 
adjustment screen. However, the picture contrast 
remains adjustable. Turn the menu selection control 
right to increase the contrast and turn left to decrease it.

CHROMA

Press the button to display the adjustment screen and 
adjust the color intensity. Press again to hide the 
adjustment screen. However, the color intensity remains 
adjustable. Turn the menu selection control right to 
increase the intensity and turn left to decrease it.

VOLUME

Press the button to display the adjustment screen and 
adjust the volume. Press again to hide the adjustment 
screen. However, the volume remains adjustable. Turn 
the menu selection control right to increase the volume 
and turn left to decrease it.

I/P MODE

Press the button to set the delay by the picture 
processing to the minimum level when interlace signal 
is input. The mode switches in the sequence INTER-
FIELD 

t

 FIELD MERGE 

t

 LINE DOUBLER with 

every press of the button (see “I/P MODE” on page 22).

PHASE

Press the button to display the adjustment screen and 
adjust the color tones. Press again to hide the adjustment 
screen. However, the color tones remain adjustable. 
Turn the menu selection control right to increase the 
green tone and turn left to increase the purple tone.

APERTURE

Press the button to display the adjustment screen and 
adjust the picture sharpness. Press again to hide the 
adjustment screen. However, the picture sharpness 
remains adjustable. Turn the menu selection control 
right to make the picture sharper and turn left to make 
the picture softer.

CAMERA FOCUS

Press the button to confirm the camera focus.
An image with sharpened edges is displayed.

Scan mode image

640 × 480

800 × 450

640 × 480

800 × 450

IN

PU

T

4

3

16

9

NORM

A

L

(zero

sca

n)

4 : 3

16: 9

OVER

(5

%

 o

v

er 

scan

)

4

3

16

9

Summary of Contents for LMD-940W
































Reviews: