Features
46
Features
The LMD-941W (9 type) is equipped with a Full HD
(1920 × 1080) LCD panel providing precise image and
high performance in multiple formats, suitable for
broadcast or business use. It supports both digital or
analog main broadcast signal and HDMI
1)
input. It is
also equipped with functions to adjust for various
objects or use.
1)
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
High brightness Full HD (1920 × 1080) LCD
panel
Because of precise image, wide viewing angle
technology, real color images can be reproduced. Use
the light intercepting hood, connector protector and
carrying handle (optional Sony VF-510 Monitor ENG
Kit) for outdoor use.
Color space function
Sony’s “ChromaTRU” technology brings to you
broadcast standard (ITU-R BT.709/EBU/SMPTE-C)
color space settings. You can contrast the images of the
monitors placed on monitor wall mount or rack mount.
Strong, slim and lightweight
The strong, slim, and lightweight design of the
aluminum die-cast chassis makes the monitor suitable
for use with rack mounts or as a portable monitor. This
reduces the weight burden on an outdoor broadcasting
van, and allows for a wider working space.
I/P mode select
The desired I/P mode for interlace signal can be selected
for your purpose.
For more information, see “SYSTEM SETTING” on
page 62.
Select marker/scan display
Various items for broadcast use can be displayed.
The center marker, aspect marker or display size (scan),
etc are displayed by selecting according to use.
For more information, see “MARKER SETTING” on
page 63 and SCAN of “FUNCTION BUTTON
SETTING” on page 67.
Input signal waveform, audio level, and
vectorscope display
The input signal waveform, the audio level (embedded
audio only), or the vectorscope can be displayed.
For more information, see “WFM/ALM/VECTOR
(waveform monitor, audio level meter, and vectorscope)
SETTING” on page 65.
Timecode display
Timecode superimposed on SDI signals is displayed on
the screen.
For more information, see “T/C (time code) DISPLAY
SETTING” on page 64.
Camera focus
This function sharpens the edges of the image more than
the amount set by the upper limit of the aperture value in
the USER CONTROL menu.
This is convenient for focusing with the camera. This
function also colors the focused part of an image,
providing fast and exact focusing.
Scan setting/native display
When video signals are input, you can set the display
size to 0% scan (normal) or 5% over scan (over).
A native display function that maps the pixel of the
signal to the panel in one-to-one mode is also equipped.
With this, scaling to correct the screen aspect ratio is
done to the horizontal direction of SD signals with non-
square pixels (number of horizontal pixels of the signal
system is 720 or 1440) or 640 × 480 SD signal of HDMI
video.
External remote function
The input signal is selected or various items are adjusted
by use of the serial (Ethernet) remote function. Up to 32
monitors and control units (max. 4) can be connected by
the Ethernet (10BASE-T/100BASE-TX) connection
and controlled remotely on the network. You can control
individual monitors or monitor groups simply by
entering the monitor ID or group ID number. You can
also execute the same operation on all connected
monitors, or put all connected monitors into the same
setup and adjustment state.
For more information, see SERIAL REMOTE of
REMOTE menu on page 71.
Refer to the Operation Manual of the BKM-15R or
BKM-16R Monitor Control Unit (optional).
Closed caption
EIA/CEA-608 and EIA/CEA-708 standard closed
caption signals superimposed on an SDI signal can be
displayed. Closed caption signals superimposed on an
NTSC signal can also be displayed.
IMD (in-monitor display)
With the external remote function, image source names
and tally information are displayed on the screen.
For more information, see IMD (in-monitor display)
SETTING on page 64.
