Adjustment Using the Menus
63
MARKER SETTING
I/P MODE (picture delay
minimum)
Selects to set the delay by the
picture processing to the minimum
level when the interlace signal is
input.
•
INTER-FIELD
*: Mode for
giving precedence to the
picture quality. Performs
interpolation depending on
the movement of the images
between the fields. It takes
longer than the other setting
modes to process the
picture.
•
FIELD MERGE
: The
processing time is shorter.
Combines the lines in the
odd fields and even fields
alternately regardless of the
movement of images.
Suitable for viewing still
images.
•
LINE DOUBLER
: The
processing time is shorter.
Performs interpolation by
repeating each line in the
data receiving sequence
regardless of the field. As
the line flicker is displayed
in this mode, it is available
for checking the line flicker
of the telop work and so on.
•
INTRA-FIELD
: INTRA-FIELD
is only available for 1920 ×
1080 SDI signal input.
Mode to provide naturally
reproduced image and quick
picture processing. Performs
interpolation within the
fields. Suitable for 1920 ×
1080 SDI signal input.
*
When DISPLAY in WFM/ALM/
VECTOR SETTING is activated,
INTER-FIELD cannot be
selected.
LED BRIGHTNESS
Sets the brightness of the LED of
the buttons.
•
HIGH
: The LED becomes
brighter.
•
LOW
: The LED becomes darker.
RGB RANGE
Sets the black level and white level
for the RGB format of HDMI
signals.
•
FULL
: 0 (black level) to 255
(white level)
•
LIMITED
: 16 (black level) to
235 (white level)
Submenu
Setting
SD PIXEL MAPPING
Selects SD picture size (pixels)
according to the input signal format
from the COMPOSITE IN
connector.
When picture signals in the size
of 720 × 576 (50i) (or 720 × 487
(60i)) are input
Select 720 × 576 (or 720 ×
487). This is the default
setting.
When 702 × 576 (or 712 ×
483) is selected, all sides of
the input picture are cut off
by several pixels.
When picture signals in the size
of 702 × 576 (50i) (or 712 × 483
(60i)) or equivalent are input
Select 702 × 576 (or 712 ×
483).
When 720 × 576 (or 720 ×
487) is selected, a black
border (of several pixels
wide) appears around the
input picture.
Submenu
Setting
MARKER ENABLE
Selects ON to display the marker
and OFF not to display.
Note
When NATIVE is selected in the
SCAN setting, the marker is not
displayed.
To display the marker, select a
setting other than NATIVE.
MARKER SELECT
Selects the aspect ratio according to
the film, when the frame of the film
is displayed on the screen.
When 16:9 aspect ratio is selected
with the button which the aspect
function is assigned
You can select from among
4:3, 15:9, 14:9, 13:9, 1.85:1,
2.35:1, 1.85:1 & 4:3 and
OFF.
When 4:3 aspect ratio is selected
with the button which the aspect
function is assigned
You can select 16:9 or OFF.
Submenu
Setting
M A R K E R E N A B L E :
xxx
M A R K E R S E L E C T :
xxx
C E N T E R M A R K E R :
xx
S A F E T Y A R E A :
xxx
M A R K E R L E V E L :
x
M A R K E R M AT :
xxx
USER CONFIG – MARKER SETTING
