Adjustment Using the Menus
68
When LINE SELECT is set to ON and WFM is selected,
each time you press the button, the settings change in the
sequence WFM display activated
t
Line position
setting
t
WFM display deactivated. Turn the menu
selection control to move the line, when the line position
is selected.
When LINE SELECT is set to OFF, the WFM display
switches between activated and deactivated.
ZOOM
Press the button to zoom in the WFM/ALM/vectorscope
display. Set the ZOOM setting in the WFM/ALM/
VECTOR SETTING menu (see page 66).
BRIGHTNESS
Press the button to adjust the picture brightness. Press
the button to display the adjustment screen and adjust
the picture brightness. Press again to hide the adjustment
screen. However, the picture brightness remains
adjustable. Turn the menu selection control right to
increase the brightness and turn left to decrease it.
CONTRAST
Press the button to adjust the picture contrast. Press the
button to display the adjustment screen and adjust the
picture contrast. Press again to hide the adjustment
screen. However, the picture contrast remains
adjustable. Turn the menu selection control right to
increase the contrast and turn left to decrease it.
CHROMA
Press the button to adjust the color intensity. Press the
button to display the adjustment screen and adjust the
color intensity. Press again to hide the adjustment
screen. However, the color intensity remains adjustable.
Turn the menu selection control right to increase the
intensity and turn left to decrease it.
VOLUME
Press the button to adjust the volume. Press the button to
display the adjustment screen and adjust the volume.
Press again to hide the adjustment screen. However, the
volume remains adjustable. Turn the menu selection
control right to increase the volume and turn left to
decrease it.
I/P MODE
Press the button to set the delay by the picture
processing to the minimum level when interlace signal
is input. The mode switches in the sequence INTER-
FIELD
t
FIELD MERGE
t
LINE DOUBLER
t
INTRA-FIELD with every press of the button (see “I/P
MODE” on page 63).
PHASE
Press the button to adjust the color tones. Press the
button to display the adjustment screen and adjust the
color tones. Press again to hide the adjustment screen.
However, the color tones remain adjustable. Turn the
menu selection control right to increase the green tone
and turn left to increase the purple tone.
APERTURE
Press the button to adjust the picture sharpness. Press the
button to display the adjustment screen and adjust the
picture sharpness. Press again to hide the adjustment
screen. However, the picture sharpness remains
adjustable. Turn the menu selection control right to
make the picture sharper and turn left to make the
picture softer.
FOCUS
Press the button to confirm the camera focus.
An image with sharpened edges is displayed.
T/C
Press the button to display the time code display. Adjust
the settings for the time code display in T/C DISPLAY
SETTING (see page 64).
IMD
Press the button to display IMD. Adjust the settings for
the IMD display in IMD SETTING (see page 64).
SILENT MODE
Press the button to stop the built-in cooling fan.
Note
Stopping the fan will result in a temperature increase
inside the unit, possibly shortening the life of the unit.
When you use SILENT MODE, the display may
become dark to protect the interior circuit, and the Input
select button LED may flash. This is not a malfunction.
Scan mode image
1440 × 1080
1920 × 1080
1512 × 1080
1920 × 1080
INPUT
4
3
16
9
NORM
A
L
(zeros
can
)
4 : 3
16:9
OV
E
R
(5
%
o
v
er sca
n
)
4
3
16
9
