Troubleshooting / Specifications
72
Troubleshooting
This section may help you isolate the cause of a problem
and as a result, eliminate the need to contact technical
support.
•
The unit cannot be operated
t
The key protection
function works. Set the KEY INHIBIT setting to OFF
in the KEY INHIBIT menu.
Or, a function that does not work is assigned. Press the
RETURN button to check the assigned functions.
•
The black bars appear at the upper and lower
positions of the display
t
When the signal aspect
ratio is different from that of the panel, the black bars
appear. This is not a failure of the unit.
•
Adjustments and settings cannot be made
t
Adjustments and settings may not be possible
depending on the input signals and the status of the
unit. See “Input Signals and Adjustable/Setting Items”
(page 50).
Specifications
Picture performance
Panel
a-Si TFT Active Matrix LCD
Picture size (diagonal)
228.0 mm (9 inches)
Effective picture size (H × V)
198.7 × 111.8 mm (7
7
/
8
× 4
1
/
2
inches)
Resolution (H × V)
1920 × 1080 pixels
Aspect
16:9
Pixel efficiency 99.99%
Viewing angle (Panel specification)
89º/89º/89º/89º
(up/down/left/right, contrast > 10:1)
Normal scan
0%
Over scan
5%
Input
Composite input (NTSC/PAL)
BNC type (× 1)
1 Vp-p ± 3 dB sync negative
SDI input
BNC type (× 2)
HDMI input
HDMI (× 1) (HDCP correspondence)
Audio input
Stereo mini jack (× 1)
–5 dBu
47 kilohms or higher
Parallel remote Modular connector 8-pin (× 1) (Pin-
assignable)
Serial remote (LAN)
RJ-45 (× 1) (Ethernet, 10BASE-T/
100BASE-TX)
DC IN
XLR-type 4-pin (male) (× 1), 12 V DC
(output impedance 0.05 ohms
or
less)
Output
Composite output
BNC type (× 1)
Loop-through, with 75 ohms automatic
termination
SDI (3G/HD/SD) output
BNC type (× 1)
Output signal amplitude: 800 mVp-p
±10%
Output impedance: 75 ohms
unbalanced
Audio monitor output
Stereo mini jack (× 1)
Built-in speaker output
0.5 W Monaural
Headphones output connector
Stereo mini jack (× 1)
