background image

 

4

EN55103-2  : Electromagnetic 
Susceptibility(Immunity)

This product is intended for use in the following 
Electromagnetic Environments: E1 (residential),  E2 
(commercial and light industrial),  E3 (urban outdoors),  
E4 (controlled EMC environment, ex. TV studio).

For the customers in Europe

This product has been manufactured by or on behalf of 
Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan. Inquiries related to product compliance 
based on European Union legislation shall be addressed 
to the authorized representative, Sony Deutschland 
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, 
Germany. For any service or guarantee matters, please 
refer to the addresses provided in the separate service or 
guarantee documents.

For LMD-A240

When installing the installation space must be secured 
in consideration of the ventilation and service operation.

Do not block the ventilation slots at the rear panel, and 
vents of the fans.

Leave a space around the unit for ventilation.

Leave more than 40 cm of space in the rear of the unit 
to secure the operation area.

When the unit is installed on the desk or the like, leave at 
least 1U (4.4 cm) or more of space above and below the 
unit. Leaving 40 cm or more of space above the unit is 
recommended for service operation.

Disposal of Old Electrical & Electronic Equipment 
(Applicable in Republic of India)

This symbol indicates that this product shall not be 
treated as household waste 

and may not be dropped in 

garbage bins

. Product owners are advised to deposit 

their product at the nearest collection point for the 
recycling of electrical and electronic equipment.
Your co-operation shall facilitate proper disposal & help 
prevent potential negative consequences/hazards to the 
environment and human health, which could otherwise 
be caused by inappropriate waste disposal 

including 

improper handling, accidental breakage, damage and/ 
or improper recycling of e-waste

. The recycling of 

materials will help to conserve natural resources.

For more detailed information about recycling of this 
product, please contact your local civic office, your 
household waste disposal service provider or the store 
where you made the purchase. You may contact our 
company’s toll free number in India for assistance.

This product complies with the “India E-waste Rule 
2011”. The E-waste Rules, 2011 is an Indian directive 
aimed at reducing the harmful environmental impact of 
waste electrical equipment by restricting the use of 
known hazardous substances. As of 1st May 2012, new 
electrical and electronic equipment introduced into the 
market may no longer contain the following chemicals 
or its specified maximum concentration levels:
Lead, Mercury, Hexavalent Chromium, Polybrominated 
Biphenyls (PBB) or Polybrominated Diphenylethers 
(PBDE) - in concentrations exceeding 0.1 weight % and 
Cadmium - 0.01 weight %, except of exemptions set in 
Schedule 2 of the aforesaid Rule.

For kundene i Norge

Dette utstyret kan kobles til et IT-
strømfordelingssystem.

Apparatet må tilkoples jordet stikkontakt

Suomessa asuville asiakkaille

Laite on liitettävä suojamaadoituskoskettimilla 
varustettuun pistorasiaan

För kunderna i Sverige

Apparaten skall anslutas till jordat uttag

For the customers in the U.S.A.
SONY LIMITED WARRANTY

 - Please visit http://

www.sony.com/psa/warranty for important 
information and complete terms and conditions of 
Sony’s limited warranty applicable to this product.

For the customers in Canada
SONY LIMITED WARRANTY

 - Please visit http://

www.sonybiz.ca/solutions/Support.do for important 
information and complete terms and conditions of 
Sony’s limited warranty applicable to this product.

For the customers in Europe

Sony Professional Solutions Europe - Standard 
Warranty and Exceptions on Standard Warranty.
Please visit http://www.pro.sony.eu/warranty for 
important information and complete terms and 
conditions.

For the customers in Korea
SONY LIMITED WARRANTY

 - Please visit http://

bpeng.sony.co.kr/handler/BPAS-Start for important 
information and complete terms and conditions of 
Sony’s limited warranty applicable to this product.

Summary of Contents for LMD-A170








































Reviews: