background image

Using the Menu

15

 

Using the Menu

The unit is equipped with an on-screen menu for 
making various adjustments and settings such as picture 
control, input setting, set setting change, etc.

The current settings are displayed in place of the 



 

marks on the illustrations of the menu screen.

1

Press the MENU button.

The menu appears.
The menu presently selected is shown in yellow.

2

Turn the menu selection control to select a menu, 
then press the menu selection control.

The menu icon presently selected is shown in 
yellow and setting items are displayed.

3

Select an item.

Turn the menu selection control to select the item, 
then press the menu selection control.
The item to be changed is displayed in yellow. 
If the menu consists of multiple pages, turn the 
menu selection control to go to the desired menu 
page.

4

Make the setting or adjustment on an item.

When changing the adjustment level:

To increase the number, turn the menu selection 
control right.
To decrease the number, turn the menu selection 
control left.
Press the menu selection control to confirm the 
number, then restore the original screen.

When changing the setting:

Turn the menu selection control to change the 
setting, then press the menu selection control to 
confirm the setting.

When returning the adjustment or setting to the 
previous value:

Press the BACK button before pressing the menu 
selection control.

Notes

An item displayed in black cannot be accessed. 
You can access the item if it is displayed in white.

If the [Key Inhibit] has been turned [On], all 
items are displayed in black. To change any of the 
items, turn the [Key Inhibit] to [Off] first.

If the [Password Lock] has been turned [On], the 
setting values of the color temperature for [User1] 
and the User Preset for [User Preset1] cannot be 
changed. To change the values, enter the 
password.

For details on the key inhibit and password lock 
functions, see “[Security] menu” (page 32).

To return the display to the previous screen

Press the BACK button.

To clear the menu

Press the MENU button.
The menu disappears automatically if a button is not 
pressed for one minute.

About the memory of the settings

The settings are automatically stored in the monitor 
memory.

BACK button

Summary of Contents for LMD-A170








































Reviews: