Adjustment Using the Menus
20
[System Setting]
[User Preset Setting]
Submenu
Setting
[Language]
Selects the menu or message language
from among seven languages.
[English]:
English
[Français]:
French
[Deutsch]:
German
[Español]:
Spanish
[Italiano]:
Italian
[
]:
Japanese
[
]:
Chinese
[LED Brightness]
Selects the brightness of the indicator’s
LED of the buttons and power switch.
[High]:
The LED becomes brighter.
[Low]:
The LED becomes darker.
[Format Display]
Selects the display mode of the signal
format.
[Auto]:
The format and scan mode
are displayed for about five
seconds when the input of the
signal starts.
[Off]:
The display is hidden.
[Power Saving]
Sets the power saving mode to [On] or
[Off]. When you set to [On], the
monitor goes into power saving mode if
no signal is input for about one minute.
While the unit is in power saving mode,
the currently-set input select button
flashes.
When a source name or tally
information is input, a front panel
button is pressed, or a parallel or serial
remote command is input, the unit exits
the power saving mode.
[Power On Setting]
Sets this unit’s setting status after the
unit is turned on. Select from [Last
Memory], [User Preset1], [User
Preset2], [User Preset3], [User Preset4],
[User Preset5] or [Factory Preset].
When [Factory Preset] is selected, the
unit returns to the factory default
setting except for the following:
Color temperature for [User1]
Color temperature for [User2]
User Preset for [User Preset1]
User Preset for [User Preset2]
User Preset for [User Preset3]
User Preset for [User Preset4]
User Preset for [User Preset5]
Password setting
Network setting
Language setting
[User Reset]
Returns to the factory default setting
except for the following:
Color temperature for [User1]
Color temperature for [User2]
User Preset for [User Preset1]
Password setting
Network setting
Language setting
[Cancel]:
Cancels the reset.
[Confirm]:
Resets the unit. When the
reset finishes, this unit restarts.
Submenu
Setting
[User Preset Status]
You can confirm the setting status of the
User Presets. The status of the selected
User Preset number is displayed. By
turning the page, you can confirm the
status of [User Preset1], [User Preset2],
[User Preset3], [User Preset4], [User
Preset5] and [Default]. The displayed
items are the following:
[Color Temp]
[Color Space]
[Gamma]
[Brightness/Contrast]
[Chroma/Phase]
[Aperture]
[Volume]
[Load]
Loads the saved settings in [User
Preset1], [User Preset2], [User Preset3],
[User Preset4], [User Preset5] and
[Default].
[Cancel]:
Cancels loading.
[Confirm]:
Loads the setting.
[Save]
Saves the current setting status to [User
Preset1], [User Preset2], [User Preset3],
[User Preset4] or [User Preset5].
[Cancel]:
Cancels saving.
[Confirm]:
Saves the setting.
Note
When the [Password Lock] is set to
[On], the [User Preset1] value is
protected by a password. When the
value is saved to [User Preset1], enter
the password.
Submenu
Setting
Summary of Contents for LMD-A170
Page 39: ...Sony Corporation ...