Precaution
13
GB
Handling the 3D Glasses
For the method and cautions of handling the supplied
3D Eye Shield Kit (CFV-E30SK), see the instructions
for use of CFV-E30SK.
Do not touch the lens surface of the 3D glasses.
Do not leave the 3D glasses in ambient high-
temperature, such as near heating equipment or inside
a car.
Do not put extra pressure on the 3D glasses to avoid
them becoming misshapen.
Make sure hard accessories or buckles not to touch the
lens surface of 3D glasses while holding or
transporting.
Avoid wearing the 3D glasses when they are aging,
breaking or being damaged. Tiny scratches on the lens
surface may interfere with your viewing enjoyment.
Laying down or looking away from the screen will
lessen the 3D effect or shifts image colors.
On Fan Error
The fan for cooling the unit is built in. When the fan
error indication appears on the screen, turn off the
power and contact an authorized Sony dealer.
On Temperature Error
When this unit is used in a high temperature
environment and the internal temperature rises, an error
is displayed on the screen. When the error is displayed,
contact an authorized Sony dealer.
On Moisture Condensation
If the unit is suddenly taken from a cold to a warm
location, or if ambient temperature suddenly rises,
moisture may form on the outer surface of the unit and/
or inside of the unit. This is known as condensation. If
condensation occurs, turn off the unit and wait until the
condensation clears before operating the unit. Operating
the unit while condensation is present may damage the
unit.
On Cleaning
For the method and cautions of handling the supplied
3D Eye Shield Kit (CFV-E30SK), see the instructions for
use of CFV-E30SK.
Before cleaning
Be sure to disconnect the AC power cord from the AC
outlet.
On cleaning the monitor and 3D glasses
A material that withstands disinfection is used for the
front protection plate of the medical use LCD monitor.
The protection plate surface is specially treated to reduce
light reflection, as are the 3D glasses. When solvents
such as benzene or thinner, or acid, alkaline or abrasive
detergent, or chemical cleaning cloth are used for the
protection plate surface/monitor surface/3D glasses, the
performance of the monitor/3D glasses may be impaired
or the finish of the surface may be damaged. Take care
with respect to the following:
Clean the protection plate surface/monitor surface/3D
glasses with a 50 to 70 v/v% concentration of isopropyl
alcohol or a 76.9 to 81.4 v/v% concentration of ethanol
using a swab method. Wipe the protection plate
surface gently (wipe using less than 1 N force).
Stubborn stains may be removed with a soft cloth such
as a cleaning cloth lightly dampened with mild
detergent solution using a swab method and then
clean using the above chemical solution.
Never use solvents such as benzene or thinner, or acid,
alkaline or abrasive detergent, or chemical cleaning
cloth for cleaning or disinfection, as they will damage
the protection plate surface/monitor surface/3D
glasses.
Do not use unnecessary force to rub the protection
plate surface/monitor surface/3D glasses with a
stained cloth. The protection plate surface/monitor
surface/3D glasses may be scratched.
Do not keep the protection plate surface/monitor
surface/3D glasses in contact with a rubber or vinyl
resin product for a long period of time. The finish of
the surface may deteriorate.
On Repacking
Do not throw away the carton and packing materials.
They make an ideal container which to transport the
unit.
If you have any questions about this unit, contact your
authorized Sony dealer.
Disposal of the Unit
Do not dispose of the unit with general waste.
Do not include the monitor with household waste.
