LED Bulb Speaker
LSPX-102E26
Preparing the remote
There is a battery inside the remote control at the time of purchase. Before using the remote control for the first time, make sure
to remove the protective sheet by following the steps below.
On the rear of the remote control, insert a coin or other object into the groove on the battery cover,
and twist it to the left, until the marking is aligned with OPEN.
The left side of the battery cover (
) is slightly lifted.
1
Open the battery cover (
), and remove the protective sheet (
) from underneath the battery.
2
Return the battery to its former position, and align the marking on the battery cover with OPEN.
3
4
