15
4. System Design
4.1. System design flow
The following shows the procedure for MAS-A100 system design, installation,
connection, and configuration.
Determine necessary equipment and installation positioning from information,
such as room structure, material, loudspeaker system, network, etc.
(See “4.2 Installation” (page 16))
Design the control network and Dante network.
(See “4.3 Network design” (page 23))
Configure Dante network settings.
(See “5.4 Routing of Dante audio” (page 59))
Perform calibration.
(See “5.5 Calibration” (page 62))
Adjust audio quality for usage environment.
(See “5.7 Audio settings” (page 68))
Design the connections with audio devices.
(See “4.4 Audio design” (page 30))
Perform initial setup using MASM-1.
(See “5.2 MAS-A100 initial setup using MASM-1” (page 49))
