52
Placing a check mark in [admin] automatically sets [Username] to “admin”.
Placing a check mark in [Same as this app.] configures the same password as the
MASM-1 login password in [password].
4.
Check the [Status] display.
Only MAS-A100 units with [Status] of [OK] can be registered. For MAS-A100 units
with other status, modify the settings as described below, or deselect the
checkbox to skip registration.
[Status]
Description
[OK]
Ready to register. When all MAS-A100 units you want to register
are in this state, proceed to step 16.
[Uninitialized]
MAS-A100 unit is in the factory default state. Perform the
procedure from step 5 to initialize the MAS-A100.
[IP address is not
accessible]
The IP address of the MAS-A100 is not accessible. Check the
network connection, IP address setting of the MAS-A100, and
HTTP proxy setting of the PC.
To change the IP address of the MAS-A100, press [Cancel] to scan
for MAS-A100 units again.
[Password is not
correct]
User name or password is incorrect.
5.
If the MAS-A100 unit is in factory default state, press the [Set-up] icon to start
initialization of the MAS-A100.
Pressing the [Set-up] icon launches Google Chrome and displays the web UI of
the MAS-A100. Perform initialization of each unit using the following procedure.
6.
Log in using the default password (user name: admin, password: Admin_1234).
