72
Function description
Bass boost is a function that enhances the low frequency range of the captured audio.
When set to [High], the low frequency range of the audio is strongly enhanced.
Use this when you feel that the loudspeaker volume is insufficient.
Depending on the usage environment, the audio clarity may be reduced due to the
enhancement of the low range.
Noise gate (for Main)
Name: Noise gate
Target: Main output
Settings: Off, Low, Middle, High
Applicable software:
Function description
Noise gate stops the audio output when the input level is low.
Even low-level input audio is output when set to [Low], but only high-level input audio
is output when set to [High]. Usually, set this to [Off].
If the level of noise reduction achieved using [Noise reduction] is insufficient, set this
to [Low], [Middle], or [High]. For example, use when there is random, low volume
noise (footsteps in the hallway, whispering voices, etc.).
Note that the beginning of speech may be lost due to the slight delay in detecting
sound input and deactivating the noise gate.
Installation in locations that require this feature to be used at all times is not
recommended. Take measures to reduce the noise, such as moving the MAS-A100
away from the noise source and lowering the noise level in the room.
Capture range (for Main)
Name: Capture range
Target: Main output
Settings: Narrow, Standard, Wide
Applicable software:
Function description
Adjusts the capture range (so that even low voices are captured). The capture range
for general speech is about 2 m to 3 m radius when set to [Standard].
MASM
Web
MASM
Web
