11
About the WRU-806A/WRU-806B UHF Synthesized Tuner Unit
Removing the tuner units
After removing the front cover, hold the tuner unit by the
top and bottom, then pull it out of the slot.
About the WRU-806A/
WRU-806B UHF
Synthesized Tuner Unit
This section describes parts and controls and the channel
setting procedure of the optional WRU-806A/WRU-806B
UHF Synthesized Tuner Unit.
For details on parts and controls and the settings of the
optional URX-M1 Diversity Tuner Module included in the
UWP-X1/X2 Wireless Microphone Package, refer to the
Operating Instructions supplied with the UWP-X1/X2.
Front panel
a
GP (group) button
To change the group, press the + button or – button while
holding down this button.
b
Display
Shows the status of the tuner and the group and channel
assigned to the unit.
For details, see the following section “Display”.
c
+ button
To select a group or channel higher than the current one,
press this button while holding down the GP or CH button.
Pressing this button only changes the indication on the
display section from GP/CH to frequency.
d
– button
To select a group or channel lower than the current one,
press this button while holding down the GP or CH button.
1
2
3
4
5
