Wireless Stereo Headset
MDR-ZX220BT
Pairing and connecting with a computer (Windows Vista)
Pairing is the process required to create a link between BLUETOOTH devices to allow wireless connection. You must pair a
device with the headset to be able to make a BLUETOOTH connection for the first time.
Before you start pairing operation, make sure that:
Your computer has a BLUETOOTH function that supports music playback connections (A2DP).
The computer is placed within 1 m(3 feet) of the headset.
The headset is charged sufficiently.
The operating instructions of the computer is on hand.
Depending on the computer, the built-in BLUETOOTH adaptor should be turned on. For whether or not a BLUETOOTH
adaptor is incorporate, and for how to turn it on, refer to the operating instructions supplied with the computer.
Enter pairing mode on this headset.
When you pair the headset with a device for the first time after you bought it, or after you initialized the headset (the headset
has no pairing information), press and hold the
button for about 2 seconds when the headset is turned off. The headset
enters pairing mode automatically.
When you pair a 2nd or subsequent device (the headset has pairing information for other devices), press and hold the
button for about 7 seconds.
Make sure that the indicator flashes blue and red alternately after you release the button. You hear voice guidance
“BLUETOOTH pairing”.
1
Resume the computer from sleep mode.
2
Register the computer to the headset.
3
Right-click the BLUETOOTH icon on the windows toolbar, then click [Add New Connection].
1.
44
