19
SECTION 4
TEST MODE
Function name
&/1
button
x/Z
button
AMS
Left or Right
knob
Push
u
Function
Cancel or move to top hierarchy
Set
Select
Set submenu
4-1. PRECAUTIONS FOR USE OF TEST MODE
• As loading related operations will be performed regardless of the test mode operations being performed, be sure to check that the disc
is stopped before setting and removing it.
4-1-1. Recording laser emission mode and operating buttons
• Continuous recording mode (CREC 1MODE) (C35)
• Laser power check mode (LDPWR CHECK) (C13)
• Laser power adjustment mode (LDPWR ADJUS) (C04)
• Iop check (Iop Compare) (C27)
• Iop value nonvolatile writing (Iop NV Save) (C06)
• Traverse (MO) check (EF MO CHECK) (C14)
• Traverse (MO) adjustment (EF MO ADJUS) (C07)
• When pressing the
z
button.
4-2. SETTING THE TEST MODE
The following are two methods of entering the test mode.
While pressing the AMS knob and
x/Z
button, connect the power plug to an outlet, and release the AMS knob and
x/Z
button.
When the test mode is set, “[Check]” will be displayed. Rotating the AMS knob switches between the following three groups;
···
y
Check
y
Service
y
Develop
y
···.
NOTE:
Do not use the test mode in the [Develop] group.
If used, the unit may not operate normally.
If the [Develop] group is set accidentally, press the
x/Z
button immediately to exit the [Develop] group.
4-3. EXITING THE TEST MODE
Press the
x/Z
button, remove the power plug to the outlet.
4-4. BASIC OPERATIONS OF THE TEST MODE
All operations are performed using the AMS knob,
@/1
button, and
x/Z
button.
The functions of these buttons are as follows.
*Note:
As this unit has only a few buttons, one button is assigned with several functions in the test mode.”
Press the
z
button, AMS knob to switch the functions.
• Each time the
z
button is pressed, the display switches in the follwing order, “PGM”
t
“blank”
t
“PGM”
t
–.
• Rotate the AMS knob and the display switches in the following order, “blank”
t
“TOC”
t
“EDIT”
t
“TOC EDIT”
t
“
[ ]
”
t
“
[TOC ]
”
t
“
[ EDIT]
”
t
“
[TOC EDIT]
”
t
“blank”
t
– –.
For simplicity, operations of
z
button will not be discribed here.
Example)
x/Z
: Lights-out “PGM” and press the
x/Z
button.
x/Z
“PGM” : Display “PGM” and press the
x/Z
button.
The functions of each button change with the display.
Bottons and Corresponding Functions
“PGM” Lights-out
LCD displayed
Buttons
“PGM”
displayed
Nothing
TOC
EDIT
TOC EDIT
TOC
EDIT
TOC EDIT
displayed
@/1
@/1
ENTER
REPEAT
PLAY
CLEAR
FF
PLAY
DISPLAY
—
(YES)
MODE
MENU
x/Z
EJECT
(EDIT)/
STOP
REC
—
FR
SCROLL
TIME
—
NO