Sony MDX-62, Operating Instructions Manual

12

EN

To increase

To decrease

Changing the operative direction

The operative direction of controls is factory-
set as in the illustration below.

If you need to mount the rotary commander on
the right side of the steering column, you can
reverse the controls operative direction.

Press 

(SOUND)

 two seconds while

pushing the VOL control.

Tip

You can control the operative direction of controls
with the unit.

Adjusting the sound
characteristics

You can adjust the bass, treble, balance and
fader.
Each source can store the bass and treble levels
independently.

1

Select the item you want to adjust by
pressing 

(SOUND)

 repeatedly.

VOL (volume) 

n

 BAS (bass) 

n

 TRE

(treble) 

n

 BAL (left-right) 

n

 FAD (front-

rear)

2

Adjust the selected item by rotating the
dial.

Adjust within three seconds after selecting.
(After three seconds, the dial functions as
volume control.)

Rotate the control momentarily and
release it to:

• Locate a specific track on a disc. Rotate

and hold the control until you locate the
specific point in a track, then release it to
start playback.

• Tune in the stations automatically. Rotate

and hold the control to tune in the specific
station.

By pressing in and rotating the
control (the PRESET/DISC control)

Push in and rotate the control to:

• Receive the stations memorized on the

number buttons.

• Change the disc.

Other operations

Press 

(LIST)

 to display the

memorized names.

Press 

(SOUND)

 to adjust the

volume and sound menu.

Rotate the VOL control to
adjust the volume.

Press 

(ATT)

 to

attenuate the
sound.

Press 

(OFF)

 to turn

off the unit.

OFF