13
EN
Changing the sound and
display settings
You can set:
• Clock (page 6).
• D.Info (dual information) to display the clock
and the play mode at the same time (on) or to
display the information alternately (off).
• Amber/Green to change the illumination
color to amber or green.
• Dimmer to change the brightness of the
display.
— Select “on” to dim the display.
• Contrast to adjust the contrast if the
indications in the display are not
recognizable because of the unit's installed
position.
• Beep to turn the beep tones on or off.
• RM (Rotary Commander) to change the
operative direction of the controls of the
optional rotary commander.
— Select “norm” to use the rotary
commander in the factory preset
position.
— Select “rev” when you mount the rotary
commander on the right of the steering
column.
• A.Scrl (Auto Scroll) (page 7, 14).
1
Press
(SHIFT)
.
2
Press
(2)
(SET UP) repeatedly until the
desired setting mode appears.
Each time you press
(2)
(SET UP), the item
changes as follows:
Clock
n
D.Info
n
Amber/Green
n
Dimmer
n
Contrast
n
Beep
n
RM
n
A.Scrl
Note
The displayed item will differ depending on
the source.
Boosting bass sound
— D-bass
You can enjoy clear and powerful bass sound.
The D-bass function boosts the low frequency
signal with a sharper curve than conventional
bass boost.
You can hear the bass line more clearly even if
the vocal sound is the same volume. You can
emphasize and adjust the bass sound easily
with the D-BASS dial. This effect is similar to
the one you get when you use an optional
subwoofer system.
Moreover, the Digital D-bass
*
function creates
even sharper and more powerful bass sound
than Analog D-bass.
Adjusting the bass curve
Turn the D-BASS dial to adjust the bass
level (1, 2 or 3).
“D-BASS”
*
appears in the display.
*
Digital D-bass is available during MD playback or
when connected to an optional CD/MD unit
which has the digital D-bass function.
To cancel, turn the dial to the OFF position.
Note
If the bass sound becomes distorted, adjust the D-
BASS dial or volume control.
Digital D-BASS
0dB
D-BASS 3
D-BASS 2
D-BASS 1
0dB
D-BASS 3
D-BASS 2
D-BASS 1
Level
Analog D-BASS
Level
Frequency (Hz)
Frequency (Hz)
Other Functions
Attenuating the sound
Press
(ATT)
on the rotary commander or
wireless remote.
“ATT on” flashes momentarily.
To restore the previous volume level, press
(ATT)
again.
Tip
The unit decreases the volume automatically when
a telephone call comes in (Telephone-ATT
function).
3
Press
(4)
(
n
) to select the desired
setting (for example: ON or OFF).
4
Press
(SHIFT)
.
When the mode setting is complete, the
normal playback mode appears.
Summary of Contents for MDX-62
Page 23: ...23 EN ...
Page 24: ...24 EN I 3 862 552 51 1 Sony Corporation Printed in Japan ...
