Sony MDX-62, Operating Instructions Manual

17

EN

Note

If you have not labeled the disc, the bank edit
mode does not appear. To go back to the
normal playback mode, press 

(SHIFT)

.

2

Push the 

(SEEK/AMS)

 control up or down

to select the track number you want to
skip and press 

(5)

 (ENTER).

The indication changes from “Play” to
“Skip”. If you want to return to “Play”,
press 

(5)

 (ENTER) again.

CD/MD unit

Notes

• Once a disc name has been displayed for five

seconds, the display goes back to its normal
playback mode. To turn off the display, press

(DSPL)

.

• The track names are not displayed during MD or

CD TEXT disc playback.

• If there are no discs in the magazine, “NO Disc”

appears in the display.

• If a disc has not been assigned a custom file,

“

********

” appears in the display.

• If the disc information has not been read by the

unit, “?” appears in the display. To load the disc,
first press the number button, then choose the
disc that has not been loaded.

• The information appears only in upper case.

There are also some letters which cannot be
displayed (during MD playback).

Selecting specific tracks
for playback

— Bank (CD unit with custom file function)

If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.

1

Start playing the disc and press 

(SHIFT)

.

Then press 

(3)

 (PLAY MODE) for two

seconds.

Bank edit mode

3

Repeat step 2 to set the “Play” or “Skip”
mode on all the tracks.

4

Press 

(3)

 (PLAY MODE) for two seconds.

The unit returns to the normal CD playback
mode.

5

Press 

(SHIFT)

.

Notes

• You can set the “Play” and “Skip” mode on up

to 24 tracks.

• You cannot set the “Skip” mode on all the

tracks.

Playing the specified tracks only

You can select:
• Bank on to play the tracks with the “Play”

setting.

• Bank inv (Inverse) to play the tracks with the

“Skip” setting.

1

During playback, press 

(SHIFT)

, then

press 

(3)

 (PLAY MODE) repeatedly until

“Bank” appears.

2

Press 

(4)

 (

n

) repeatedly until the

desired setting appears.

z

 Bank on 

z

 Bank inv 

z

 Bank off

Playback starts from the track following the
current one.

3

Press 

(SHIFT)

.

To go back to the normal playback mode,
select “Bank off” in step 2 above.

Locating a disc by name

— List-up (CD unit with custom file function
or MD unit)

You can use this function with discs that have
been assigned a custom name. For more
information on disc names, refer to “Labeling a
CD.” (page 16)

1

Press 

(LIST)

 momentarily.

The name assigned to the disc currently
playing appears in the display.

2

Press 

(LIST)

 repeatedly until you find the

desired disc.

3

Press 

(5)

 (ENTER) to play back the disc.

DISC

ENTER

DISC

PLAY MODE

ENTER

TRACK

DISC

PLAY MODE

ENTER

TRACK

PLAY MODE

BANK