18
1
Press
(DISPLAY/PTY)
during FM
reception until “PTY” appears.
The current programme type name appears if
the station is transmitting the PTY data.
“- - - - - - - -” appears if the received station is
not an RDS station, or if the RDS data is not
received.
2
Press
(DISC/PRESET)
repeatedly until
the desired programme type appears.
The programme types appear in the order
shown in the table.
“- - - - - - - -” appears if the programme type
is not specified in the RDS data.
3
Press
(ENTER)
.
The unit starts searching for a station
broadcasting the selected programme type.
Setting the clock
automatically
— CT
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
During radio reception, press
(MENU)
,
then press either side of
(DISC/PRESET)
repeatedly until “CT-
OFF” appears.
2
Press the (+) side of
(SEEK)
repeatedly
until “CT-ON” appears.
The clock is set.
3
Press
(ENTER)
to return to the normal
display.
To cancel the CT function, select “CT-OFF” in
step 2.
Notes
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by
the CT function and the actual time.