20
EC/NC Mode (Echo Canceller/Noise
Canceller Mode)
You can reduce echo and noise.
Press and hold
(5)
/ to select to “EC/NC-1” or
“EC/NC-2.”
Note
Configurable during a call.
Call transfer
In order to activate/deactivate the appropriate
device (this unit/cellular phone), check the
following.
1
Press
(MODE)
or use your cellular
phone.
For details on cellular phone operation, refer to
your cellular phone manual.
Note
Depending on the cellular phone, handsfree
connection may be cut off when call transfer is
attempted.
Preset dial
Contacts (up to 6) in the phonebook of a cellular
phone can be stored in the preset dial.
1
Press
(SOURCE/OFF)
repeatedly until
“BT PHONE” appears.
2
Press and hold a number button (
(1)
to
(6)
) to select the preset number to
store.
“P (preset number) WAITING” appears.
3
Send the phonebook data by
operating the cellular phone.
The contact is stored in the selected preset
number.
Voice dial activation
You can activate voice dialing with a cellular
phone connected to this unit by saying the voice
tag stored on the cellular phone, then make a call.
1
Press
(SOURCE/OFF)
repeatedly until
“BT PHONE” appears.
2
Press
(handsfree).
“VOICE DIAL” appears.
3
Say the voice tag stored on the cellular
phone.
Your voice is recognized, and the call is
made.
Notes
•
Check that the unit and cellular phone are
connected beforehand.
•
Store a voice tag on your cellular phone beforehand.
•
If you activate voice dialing with a cellular phone
connected to this unit, this function may not always
work in some cases.
•
Noises such as the engine running may interfere
with sound recognition. In order to improve
recognition, operate under conditions where noise is
minimized.
•
Voice dialing may not work in some situations,
depending on the effectiveness of the cellular
phone’s recognition function. For details, see the
support site (page 16).
Tips
•
Speak in the same way as you did when you stored
the voice tag.
•
Store a voice tag while seated in the car, via this unit
with “BT PHONE” source selected.
SMS indicator
While connecting a cellular phone to this unit,
the SMS indicator informs you of any incoming
or unread SMS messages.
If you receive a new SMS message, the SMS
indicator flashes.
If there are any unread SMS messages, the SMS
indicator stays lit.
Note
Function of the SMS indicator may depend on the
cellular phone.
Music streaming
Listening to music from an audio
device
You can listen to music of an audio device on this
unit if the audio device supports A2DP
(Advanced Audio Distribution Profile) of
Bluetooth technology.
1
Turn down the volume on this unit.
2
Press
(SOURCE/OFF)
repeatedly until
“BT AUDIO” appears.
3
Operate the audio device to start
playback.
4
Adjust the volume on this unit.
Adjusting the volume level
The volume level is adjustable for any difference
between the unit and the Bluetooth audio device.
