45
Setting the clock
The clock uses a 24-hour indication.
1
Press
(SYSTEM SETUP)
.
The system setup item appears on the main
unit.
2
Press
M
/
m
to select “CLOCK ADJ,”
then press
(ENTER)
.
The hour indication flashes.
3
Press
M
/
m
to set the hour and minute.
To move the digital indication, press
<
/
,
.
4
Press
(ENTER)
.
The setting is complete.
To show the clock during playback, press
(DSPL)
repeatedly until it appears.
With the main unit
Rotate the volume control dial instead of pressing
M
/
m
, press the volume control dial instead of
<
/
,
or
(ENTER)
.
Using Optional Equipment
Auxiliary equipment
You can connect auxiliary devices to the unit,
and listen on your car speakers.
Up to 2 devices can be connected, one to the
AUX input jack (stereo mini jack) on the front,
and the other to the BUS AUDIO IN/AUX
AUDIO IN terminals* on the rear. The volume
level is adjustable for any difference between the
unit and the auxiliary device.
*
Unavailable when another optional device is
connected to the BUS CONTROL IN terminal. To
connect both an auxiliary device and optional
device, use the optional AUX-IN selector.
Connecting an auxiliary device
1
Turn off the auxiliary device.
2
Turn down the volume on the unit.
3
Connect to the unit.
On the front
Connect to the AUX input jack.
*
Be sure to use a straight type plug.
On the rear
Connect to the BUS AUDIO IN/AUX AUDIO
IN terminals.
Z
X
Z
PL
DSPL
SYSTEM
SETUP
</M/m/,
ENTER
continue to next page
t
Z
X
Z
M/m
ENTER
SYSTEM
SETUP
MODE
SRC
AUX
AUX
Connecting cord
*
(not supplied)
