MEX-DV150UE/DV1500U/DV1505U
9
1
2
3
A
TOYOTA
to dashboard/center console
al tablero o consola central
Bracket
Soporte
Bracket
Soporte
B
NISSAN
to dashboard/center console
al tablero o consola central
Bracket
Soporte
Bracket
Soporte
Existing parts supplied with your car
Piezas existentes suministradas con su automóvil
A
B
1
2
max. size
5
×
8 mm
(
7
/
32
×
11
/
32
in)
Tamaño máx.
5
×
8 mm
max. size
5
×
8 mm
(
7
/
32
×
11
/
32
in)
Tamaño máx.
5
×
8 mm
max. size
5
×
8 mm
(
7
/
32
×
11
/
32
in)
Tamaño máx.
5
×
8 mm
max. size
5
×
8 mm
(
7
/
32
×
11
/
32
in)
Tamaño máx.
5
×
8 mm
Precautions
• Choose the installation location carefully so that the
unit will not interfere with normal driving operations.
• Avoid installing the unit in areas subject to dust, dirt,
excessive vibration, or high temperatures, such as in
direct sunlight or near heater ducts.
• Use only the supplied mounting hardware for a safe
and secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Connecting the parking brake
cord
Be sure to connect the parking cord (Light green) of
to the parking brake switch cord. The mounting position
of the parking brake switch cord depends on your car.
Consult your car dealer or your nearest Sony dealer for
further details.
Removing the protection collar
and the bracket
Before installing the unit, remove the protection
collar
and the bracket
from the unit.
1
Remove the protection collar
.
Pinch both edges of the protection collar
, then
pull it out.
2
Remove the bracket
.
Insert both release keys
together between
the unit and the bracket
until they click.
Pull down the bracket
, then pull up the unit
to separate.
Mounting example
Installation in the dashboard
Notes
•
Bend these claws outward for a tight fit, if necessary
(
-2)
.
•
Make sure that the 4 catches on the protection collar
are
properly engaged in the slots of the unit
(
-3)
.
Mounting the unit in a Japanese
car
You may not be able to install this unit in some makes of
Japanese cars. In such a case, consult your Sony dealer.
Note
To prevent malfunction, install only with the supplied screws
.
How to detach and attach the
front panel
Before installing the unit, detach the front panel.
-A To detach
Before detaching the front panel, be sure to press
.
Press
, and pull it off towards you.
-B To attach
Engage part
of the front panel with part
of the unit,
as illustrated, and push the left side into position until it
clicks.
Warning if your car’s ignition
has no ACC position
Be sure to set the Auto Off function. For details, see the
supplied Operating Instructions.
The unit will shut off completely and automatically in
the set time after the unit is turned off, which prevents
battery drain.
If you do not set the Auto Off function, press and hold
until the display disappears each time you turn
the ignition off.
RESET button
When the installation and connections are completed,
be sure to press the RESET button with a ball-point pen,
etc., after detaching the front panel.
Existing parts supplied with your car
Piezas existentes suministradas con su automóvil
Foot brake type
Tipo de freno de pedal
Parking brake switch cord
Cable de conmutación del
freno de estacionamiento
Hand brake type
Tipo de freno manual
Parking brake switch cord
Cable de conmutación del
freno de estacionamiento
Face the hook inwards.
El gancho debe encontrarse
en la parte interior.
182 mm
53 mm
Claws
Uñas
Dashboard
Tablero
Fire wall
Cortafuegos
