46
Audio setup
Select
(AUDIO SETUP), then select the desired item and option below, using
M
/
m
and
(ENTER)
.
For details on this procedure, see “Basic operation of visual setup” on page 43.
Follow the page reference for details. “
z
” indicates the default setting.
*
Excluding DVD-R/DVD-R DL/DVD-RW in VR mode.
Item
Option
Purpose
SUPER AUDIO CD MODE
Selects the sound quality for Super
Audio CD playback.
HQ (
z
)
To have high sound quality.
STD
To have standard sound quality.
SUPER AUDIO CD LAYER
Selects the playback layer (area) of
a Super Audio CD.
MULTI (
z
)
To play multi-channel area in the
Super Audio CD layer.
2CH
To play 2-channel (stereo) area in
the Super Audio CD layer.
CD
To play CD layer (if contained).
POSITION SELECT
Sets the listening position to obtain
the feeling of being in the center of
the sound field wherever you sit in
the car.
OFF (
z
)
To not set the listening position.
FRONT
To set to center front.
ALL
To set to the center of your car.
FRONT L
To set to front left.
FRONT R
To set to front right.
CUSTOM
To precisely calibrate the listening
position (page 40).
AUDIO DRC
*
Makes the sound clear when the
volume is low. Only for a DVD
conforming to Audio DRC
(Dynamic Range Control).
STANDARD (
z
)
To select the standard setting.
WIDE RANGE
To obtain the feeling of being at a
live performance.
5.1CH OUTPUT
Switches the method of outputting
5.1-channel sources.
5.1CH (
z
)
To output in 5.1 channels.
DOWNMIX
To downmix to 2 channels.
PROLOGIC II
Outputs 2-channel sources in
multi-channel.
OFF (
z
)
To deactivate the Pro Logic II
mode.
MUSIC
To create deep, wide sound for
stereo audio recordings.
MOVIE
To enhance the sound field of stereo
television shows and all programs
encoded in Dolby Surround.
