53
Rotary commander RM-X4S
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on the card remote commander or the main unit.
The following controls on the rotary commander
require a different operation from the unit.
•
PRESET/DISC control
The same as
M
/
m
on the card remote
commander or
(3)
/
(4)
(ALBUM –/+) on the
main unit (push in and rotate).
•
VOL (volume) control
The same as
(VOL)
+/– on the card remote
commander or the volume control dial on the
main unit (rotate).
•
SEEK/AMS control
The same as
.m
/
M>
on the card
remote commander or
(SEEK)
–/+ on the main
unit (rotate, or rotate and hold).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
1
While pushing the VOL control, press and
hold
(SOUND)
.
SOUND
DSPL
MODE
SOUND
DSPL
MODE
OFF
ATT
SOUND
SOURCE
DSPL
MODE
OFF
VOL
SEEK/AMS
PRESET/
DISC
To increase
To decrease