28
Sending DTMF (Dual Tone Multiple
Frequency) tones
You can send DTMF tones.
To send DTMF tones, press the required number
buttons (0 – 9, or
) on the card remote
commander during a call.
To end a call
Press
(handsfree) again, or
(OFF)
.
Note
Even if the call is ended, the Bluetooth connection is
not canceled.
Mic Gain adjustment
You can switch the volume levels (“–2,” “–1,”
“0,” “+1,” “+2”) to set a suitable level for the
other party during a call.
Tip
If you set “Auto Answer” to on, the phone call is
automatically started in the set time (page 23).
Receiving calls
When receiving a call, ring tone is output from
your car speakers.
1
Press
(handsfree) when a call is
received with a ring tone.
The phone call starts.
Note
The Built-in Microphone of this unit is located on the
rear of the front panel (page 10). Do not cover the
microphone with tape, etc.
To reject a call
Press
(OFF)
.
Call transfer
In order to activate/deactivate the appropriate
device (this unit/cellular phone), check the
following.
1
Press
(MODE)
or use your cellular
phone.
For details on cellular phone operation, refer to
your cellular phone manual.
Note
Depending on the cellular phone, handsfree
connection may be cut off when call transfer is
attempted.
Accessing a Phonebook in a
cellular phone — Phonebook
Access
You can access the phonebook in a cellular
phone via this unit.
This function may not be available, depending on
the cellular phone.
Note on PBAP
Cellular phone supports PBAP, handsfree connection
only.
1
Press
(SOURCE)
repeatedly until
“Bluetooth Phone” appears.
2
Press
(LIST/BROWSE).
The Phonebook Access menu appears.
3
Rotate the control dial until the
desired menu item appears, then
press the select button.
Depending on the setting, by rotating the
control dial again, other items can be set.
Phonebook Access menu
*
If “Security” is set, “Security Code” appears and
operation is not possible.
Note
Keep the cellular phone in standby mode.
Calling from the phonebook in a
cellular phone
1
Rotate the control dial to select “PB Browse,”
then press the select button.
2
Select an initial from the initial list.
3
Select a name from the name list.
4
Select a phone number from the number list.
5
Select “Yes.”
Access To
Switches the Phonebook access of a cellular
phone to “Local” or “SIM.”
– “Local”: to access the phonebook data in a
cellular phone’s memory.
– “SIM”: to access the phonebook data on SIM.
PB Browse
Browses the phonebook in a cellular phone to
make a call.
PB Download
*
Downloads phonebook data from a cellular
phone (page 29).
