Sony MHC-DX80 Operating Instructions Manual Download

Page: 18 / 28

MHC-DX80 4-232-652-

(1)

Sound Adjustment

Adjusting the sound

You can reinforce the bass and create a more
powerful sound.

Press GROOVE.

Each time you press this button, the display
changes cyclically as follows:

GROOVE

V-GROOVE

GROOVE OFF

GROOVE

The volume switches to power mode and the
equalizer curve changes.

V-GROOVE

The lower bass frequency of the music you are
listening to is powerfully reinforced, the
equalizer curve changes and loudness is
increased.

Selecting the sound
system

You can enjoy different sounds by selecting the
sound mode you want.

Press SURROUND SPEAKER MODE (or
turn SURROUND SPEAKER MODE on
the sound broad amplifier) to select the
sound mode you want.

LINK : Reproduces the same sound with the
different output level.

MATRIX SURR : Reproduces a wide range
of sound that actually can sense the size of
the room.

SUB WOOFER : Reproduces the low bass
frequencies sound.

Turn SURROUND SPEAKER LEVEL to
adjust the surround speaker volume.

Notes

• If you turn VOLUME (or press VOL +/– on the

remote) all the speaker volume change.

• The indicator on the sound broad amplifier will

light green when the main unit is powered on and
will light red when the main unit is on standby
mode.

Selecting the audio
emphasis effect

The audio emphasis menu lets you select the
sound characteristics according to the sound
you are listening to.

Selecting the preset effect from the

music menu

Press MUSIC EQ, MOVIE EQ or GAME EQ
(or PRESET EQ on the remote) repeatedly to
select the preset effect you want.

The preset effect name appears in the display.
See the chart “Music menu options”.

To Cancel the effect

Press EFFECT ON/OFF repeatedly until
“EFFECT OFF” appears.

Music menu options

“

SURR

” appears if you select an effect with

surround effects.

MENU

Effect

button

MUSIC

ROCK

POP
JAZZ
DANCE
SOUL
ORIENTAL*

MOVIE

ACTION

DRAMA
MUSICAL

GAME

ARCADE

RACING
ADVENTURE

* CLASSIC for Latin American models only.

For

standard music
sources.

soundtracks and
special listening
situations.

Video games.

07SOU_MHC-DX80.p65 GB

17/07/2001, 2:51 PM

Summary of Contents for MHC-DX80





























Search results

Summary of Contents for MHC-DX80

Reviews:

Related manuals for MHC-DX80

Brands by name

Popular brands

Sony MHC-DX80, Operating Instructions Manual

Search results

Summary of Contents for MHC-DX80

Reviews:

Related manuals for MHC-DX80

Brands by name

Popular brands