11
GB
G
MHC-ECL7D/ECL6D.GB.4-467-787-11(1)
Attaching the speaker
pads
Attach the supplied speaker pads
at each corner on the bottom of
the speakers to prevent them from
slipping.
Preparing the remote
control
Insert an R6 (size AA) battery
(supplied), matching the polarity as
shown below.
Notes on using the remote control
With normal use, the battery should last
for about six months.
If you do not use the remote control for a
long period of time, remove the battery to
avoid damage from battery leakage and
corrosion.
Setting the clock
1
Press
/
to turn on the
system.
2
Press and hold SHIFT, then
press ANGLE/TIMER MENU to
select the clock set mode.
If “SELECT” appears on the display,
press
/
repeatedly to select
“CLOCK,” and then press (enter).
3
Press
/
to set the
hour, and then press .
4
Use the same procedure to
set the minutes.
The clock settings are lost when
you disconnect the power cord or if
a power failure occurs.
To display the clock
Press TIME. The clock is displayed for a
few seconds.
