20
GB
MHC-ECL7D/ECL6D.GB.4-467-787-11(1)
Tuner
Listening to the radio
Presetting radio stations
1
Press FUNCTION
repeatedly to
select “FM” or “AM.”
2
Press and hold /
for 2 seconds until the
frequency begins to change
on the display.
The system automatically scans the
radio frequencies and stops when
it finds a clear station.
If scanning does not stop, press
to stop scanning, then perform
manual tuning to tune to a desired
station. You can perform manual
tuning by pressing /
repeatedly.
3
Press PROGRAM.
“P 01” flashes on the display.
4
Press /
(or press
and hold SHIFT, then press the
number buttons) to select a
preset number.
5
Press to store the station.
6
Repeat steps 2 through 5 to
preset other stations.
You can preset up to 20 FM and
10 AM stations. The preset stations
are retained for about half a day
even if you disconnect the power
cord or if a power failure occurs.
Listening to a preset radio
station
1
Press FUNCTION repeatedly to
select “FM” or “AM.”
2
Press /
(or press
and hold SHIFT, then press the
number buttons) to select a
preset number.
3
Press /
to adjust
the volume.
Tip
When an FM stereo program has static
noise, press AUDIO/SLEEP repeatedly to
select “MONO.” You will lose the stereo
effect, but reception will improve.
To change the AM tuning interval
(except for Russian model)
The AM tuning interval is preset to
9 kHz or 10 kHz by factory default. Use
buttons on the unit to change the AM
tuning interval.
1
Tune to any AM station.
2
Hold down OPTIONS on
the unit until “530” or “531”
appears on the display.
All the AM preset stations are
erased.
