25
GB
Other Oper
MHC-ECL7D/ECL6D.GB.4-467-787-11(1)
6
Select the sound source.
Press
/
repeatedly until the
desired sound source appears, then
press
.
7
Press
/
to turn off the
system.
The system automatically turns on
before the preset time.
If the system is on at the preset
time, the play timer will not be
activated. Do not operate the
system from the time the system
turns on until playback starts.
To check the setting
1
Hold down SHIFT, and then press
ANGLE/TIMER MENU.
2
Press
/
repeatedly to
select “SELECT,” then press .
3
Press
/
repeatedly to
select “PLAY SEL,” then press .
To cancel the timer
Repeat the same procedure as in “To
check the setting” until “OFF” appears
in step 3, and then press .
To change the setting
Start over from step 1 of “Using the
Tip
The play timer setting remains until the
setting is cancelled manually.
Convenient functions
Changing the brightness of the
display
The brightness of the display can be
selected from 2 levels.
The default setting is underlined.
Press DIMMER repeatedly.
“
DIM OFF”: Bright.
“DIM ON”: Dark.
About automatic standby
function
This system is equipped with an
automatic standby function. With
this function, the system enters
standby mode automatically in about
30 minutes when there is no operation
or audio signal output.
You can turn the automatic standby
function on or off. By default, the
automatic standby function is turned
on.
Hold down
/
on the unit
while the system is on, until
“AUTO STANDBY ON” or “AUTO
STANDBY OFF” appears.
