Chapter 4: the Tape Player
18
4
Press
P
on deck B again to release
recording pause.
Recording starts.
5
Press
·
on deck A.
The tape on deck A starts playing.
To stop recording
Press
p6
on deck A and B.
Notes
•When dubbing tapes originally recorded
with Dolby NR B, the dubbed tape is
automatically recorded with Dolby NR B.
•When you want to record a tape recorded
without Dolby NR B onto another tape
using Dolby NR B, press DOLBY NR so
that “DOLBY NR B” appears in the
display before recording.
To stop recording
Press
p6
on deck B.
To reduce noise during AM recording
If a whistling noise is heard while
recording, reorient the AM loop antenna for
optimum reception.
To activate DOLBY NR
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR so that “DOLBY NR B” appears
in the display after step 1.
Recording From
Another Tape
(dubbing)
When you want to dub only part of the
tape, dub manually at normal speed. Use
TYPE I (normal) or TYPE II (CrO
2
) tape for
recording.
1
Press
p6
and insert a recorded tape in
deck A with the side you want to play
facing forward.
Also, insert a blank tape in deck B with
the side you want to record on facing
forward.
Recording and playback will start from
the front side of the tape.
Make sure the tabs on the cassette for
deck B have not been removed.
2
Press FUNCTION repeatedly until
“TAPE” appears in the display.
3
Press
P
and then press
r
(
·
is linked
and depressed at the same time) on deck
B.
Be sure to press the button firmly and
swiftly.
Deck B stands by for recording.
➔
continued
POWER
n
ON
1
2
5
3,4
1
DOLBY NR
r ·
