10
1
3
4
2
Step 3: Setting the time
(continued)
3
Press ENTER/NEXT.
The minute indication flashes.
4
Turn the jog dial to set the minute.
5
Press ENTER/NEXT.
The clock starts working.
Tips
• If you’ve made a mistake, start over from step 1.
• Setting the time deactivates the demo mode.
If you want to display the demo mode, press
DEMO when the system is off.
Note
The previous explanation shows you how to set the
time while the system is off. To change the time
while the system is on, do the following:
1
Press CLOCK/TIMER SET.
2
Turn the jog dial to select “SET CLOCK”.
3
Press ENTER/NEXT.
4
Perform steps 2 through 5 above.
Step 4: Presetting
radio stations
You can preset up to 30 stations, 20 for FM
and 10 for AM.
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Every time you press this button, the
band changes as follows:
FM
˜
AM
1/u
(Power)
