26
Recording on a tape
manually
You can record from CD, tape, or radio as
you like. For example, you can record just the
songs you want or record from the middle of
the tape. The recording level is adjusted
automatically.
1
Insert a blank tape into deck B.
2
Press FUNCTION repeatedly until
the source you want to record (e.g.,
CD) appears.
3
Press REC.
Deck B stands by for recording. The
indicator on TAPE B
(
(for front side)
lights up.
The Tape Deck
To cancel Program Play
Press PLAY MODE repeatedly until
“PROGRAM” or “SHUFFLE” disappears
from the display.
To
Press
Check the
CHECK on the remote
program
repeatedly. After the last
track, “CHECK END”
appears.
Clear a track from
CLEAR on the remote in
the end
stop mode.
Clear a specific
CHECK on the remote
track
repeatedly until the
number of the track to be
erased lights up, then press
CLEAR.
Add a track to the
1
Select the disc tray with a
program
DISC 1 – 3 button.
2
Select the track by
turning the jog dial.
3
Press ENTER/NEXT.
Clear the entire
p
once in stop mode or
program
twice while playing.
Tips
• The program you made remains in the CD player
even after it has been played back. Press CD
(P
to play the same program again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
Programming the CD tracks
(continued)
1
5
3
4
2
p
