41
GB
Oth
e
r Op
eratio
ns
Hooking up the
optional components
To enhance your system, you can connect
optional components. Refer to the
operating instructions supplied with each
component.
Front panel
Rear panel
1
(USB) port
Connect an optional USB device
(Digital music player or USB storage
media).
B
D-LIGHT SYNC OUT jack
(Except for Oceanian model)
Connect the D-LIGHT SYNC
controller. You need to connect the
D-LIGHT SYNC controller to a
lighting device* (not supplied). The
lighting device will react according to
the control signals transmitted by the
D-LIGHT SYNC controller upon
receiving music source from the
system. For details on the use of the
D-LIGHT SYNC controller and
lighting device, refer to the operating
instructions supplied with the
respective device.
* Refer to the operating instructions
supplied with the D-LIGHT SYNC
controller for the recommended lighting
device.
Note
The lighting effect may be different
depending on the connected lighting device
or the type of music being played back.
C
VIDEO (AUDIO IN) L/R jacks
Use an audio cord to connect to the
audio output jacks of an optional
component (such as a TV or VCR).
D
AUDIO (AUDIO IN) L/R jacks
Use an audio cord to connect to the
audio output jacks of an optional
component (such as an MD deck).
Listening to a connected TV or VCR
Press VIDEO (or press FUNCTION
repeatedly on the remote to select
“VIDEO”).
Listening to a connected MD deck
Press AUDIO (or press FUNCTION
repeatedly on the remote to select
“AUDIO”).
1
4
3
2
D-LIGHT SYNC
controller cord