14
Inserting CDs (continued)
5
Insert a disc with the label side facing
right.
Notes
• Make sure you have inserted the disc into
each slot at a right angle to the rotary table. If
the disc is not put in straight, it may damage
the unit or the disc.
• Make sure the rotary table comes to a
complete stop before inserting or removing
discs.
With the label
side facing right
6
Repeat steps 4 and 5 to insert additional
discs.
7
Close the front cover by pushing the
right edge of the cover until it clicks.
The rotary table turns and the disc slot at the
loading position is set to the playing position.
Always close the front cover except when
you insert or remove discs.
Removing CDs
After following steps 1 to 3 of “Inserting CDs” on
page 12, remove the discs. Then close the front
cover.
Notes
• Do not insert an empty 8 cm (3-inch) CD adaptor. It
may damage the unit.
• Do not attach anything such as seals or sleeves to
CDs. It may damage the unit or the disc.
• If you drop a disc into the unit and the CD won’t go
into the slot correctly, consult your nearest Sony
dealer.
• When transporting the unit, remove all discs from
the unit.
• If you want to remove the disc played, press
ENTER after opening the front cover. The disc
comes to the loading position. Remove the disc
after the rotary table comes to a complete stop.
Tips
• To play the disc you want independently, see
“Playing your favorite CD independently” on page
26.
• You can display the original Disc Memos instead of
the disc numbers (see “Labeling a CD” on page 29)
to locate the disc easily when you start playing.
When you select a CD-TEXT disc, the disc title is
displayed instead of the disc number.
